P2DDD
Fuel Injection Quantity C Higher Than Expected
P2DDD flags excess fuel from injection path C: the quantity really burned, as estimated from airflow and lambda, sits above the request. Besides the classic leaking injector, a possible trigger after repairs is a replacement injector whose individual flow code was not programmed into the engine control, so the module calculates with the wrong flow curve. Another is an EGR valve that leaves too little fresh air, which the estimate can read as surplus fuel. GM lets its system-A adaptation take away only about 8 to 14 mm³, depending on speed and load. No manufacturer documents P2DDD publicly. P2DDC is the shortfall in path C, P2DE1 the cold-start excess; smoke and higher consumption are what drivers notice.
Possible causes
- Injector of group C leaking or nozzle worn high
- Injector correction code not programmed after replacement medium
- EGR valve not closing fully, too little fresh air medium
Symptoms
- Check engine light on
- Dark smoke under load
- Higher fuel consumption
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2DDD
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.