OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2DDC

Fuel Injection Quantity C Lower Than Expected

P2DDC is the shortfall code for a third injection path, C. Engines that need it split their injection into more parts than A and B, for example by injector group or by operating mode; the split is defined by the maker, and none documents P2DDC openly. How narrowly such a monitor is allowed to run shows in GM's 2025 diesel tables for path A: warm coolant above 70 °C, 1,100 to 1,800 rpm, 18 to 40 mm³ per stroke, steady fueling and at least 20 km/h, and only in normal and SCR warm-up combustion modes, not during filter regeneration. Its correction may add at most about 12 to 41 mm³; if path C lacks more than that, the code follows. Likely culprits are injectors of this group and weak supply pressure.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / DC

Possible causes

  • Injectors of group C coked or partly blocked high
  • Low-pressure supply weak (lift pump, filter, air in fuel) medium
  • High resistance in injector wiring of group C low

Symptoms

  • Check engine light on
  • Reduced power at part load
  • Hesitation when accelerating

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2DDC

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication