OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2DD8

Cold Start Fuel Injection Quantity B Higher Than Expected

P2DD8 means path B delivered more fuel than requested while the cold-start routine ran. A cold engine burns surplus fuel poorly, so it leaves as white or blue smoke and raw hydrocarbons before the catalyst is warm, and some of it can reach the oil. No manufacturer uses P2DD8 in public documents. Ford shows how such an excess is caught on its 6.7 litre diesel: a cold-start version of the fuel balancing check runs only in cold start mode and sets a fault when an injector correction exceeds 90 percent of its allowed authority, but it reports through the cylinder codes P0263 and up. A leaking injector, a pressure regulator overshooting in the cold or a wrong temperature signal are the usual suspects. P2DD7 is the shortfall.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / D8

Possible causes

  • Injector of group B leaking or sticking slightly open high
  • Pressure regulation overshooting when cold medium
  • Coolant temperature signal reads colder than real, too much start fuel medium
  • Cold-start calibration in engine control software low

Symptoms

  • Check engine light on after a cold start
  • White or blue smoke and fuel smell after a cold start
  • Rising oil level from fuel dilution

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2DD8

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication