P2DD6
Fuel Injection Quantity B Higher Than Expected
With P2DD6 the engine control has found that path B injects more fuel than requested, so the mixture ends up richer than planned. Typical reasons are an injector that drips after closing, a worn nozzle passing extra fuel, or rail pressure above target; a sensor that under-reads airflow can fake the same result. On diesels this shows up as soot: more black smoke and shorter intervals between filter regenerations. No manufacturer publishes P2DD6 itself. Ford's 2023 diesels flag the matching global fault as P0172 once the filtered fueling error exceeds +0.15; GM scales its upper limit for A with ambient pressure. P2DD5 is the shortfall in path B, P2DD8 the same excess during cold start.
Possible causes
- Injector in group B dripping or nozzle worn high
- Rail pressure above target (regulator, pressure sensor) medium
- Airflow sensor reading low or intake leak after the sensor medium
- Wrong injector part fitted low
Symptoms
- Check engine light on
- Black smoke, more frequent particulate filter regeneration
- Higher fuel consumption
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2DD6
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.