OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2DD5

Fuel Injection Quantity B Lower Than Expected

P2DD5 reports that the injection path the manufacturer calls B delivers less fuel than the engine control commanded. SAE leaves open what B is: a second injector set, an injector group or a separate operating mode. No manufacturer documents this code publicly. The underlying check is the one CARB has demanded from diesels since 2010: the module compares requested fuel with what airflow and lambda say was burned. GM does this for system A as an adaptation (FSA) with a lower threshold map, 200 of 400 samples, Type B; Ford diesels report a fueling error below -0.15 as P0171. P2DD6 is the opposite direction, P2DD7 the cold-start version. Expect weak pull and possibly rough running.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / D5

Possible causes

  • Injectors of group B coked or partly blocked high
  • Supply or rail pressure for this path too low (filter, pump) medium
  • Airflow or lambda measurement off, so the computed fuel looks too small medium
  • Engine control software or injector calibration data low

Symptoms

  • Check engine light on
  • Less power, sluggish response under load
  • Uneven idle

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2DD5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication