P2DCF
Control Pilot Charging Switch B Range/Performance
P2DCF means charging switch B responds electrically, but the pilot level it creates is not plausible. The only public description of such a test concerns switch A: in a GM check for the Chevrolet Volt, run only while no cable is inserted, the module shuts its internal test switch and the charging switch simultaneously, and the pilot-to-battery voltage ratio then has to lie from 0.14 to 0.28; 30 failures in 50 samples taken every 100 ms set P0CF9 as Type A. An equivalent check of switch B would catch a drifted resistor, a switch with high contact resistance or a fault where the module measures the pilot. No manufacturer documents P2DCF publicly; the MIL depends on how the maker classifies it. Circuit faults: P2DCE, P2DD0, P2DD1. Charging may be refused or stop.
Possible causes
- Resistor in the switch B branch drifted out of tolerance medium
- High contact resistance in switch, inlet or connector medium
- Fault in the pilot voltage measuring path of the charging module medium
Symptoms
- Charging refused or stopping after a short time
- Charging error message
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2DCF
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.