OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2DCD

Particulate Filter B Incorrect

P2DCD is meant for a second particulate filter, labelled B, that the engine control unit finds to be absent or not the specified part, for instance after the filter has been cut out, replaced by an empty housing or swapped for an unsuitable aftermarket unit. No manufacturer documents P2DCD publicly, and makers catch such tampering with other codes. CARB's rules for diesel vehicles and heavy-duty engines require a fault when the filter body is wrecked or taken out, or the whole unit gives way to a silencer or plain tube. Ford's 2024 gasoline summary performs this check on its second filter as P226E (bank 2): with exhaust flow of 300 to 850 m³/h and the filter above 250 °C for 30 s, normalised backpressure under 1.0 for 5 s means a missing brick. Filter A: P24FD. Expect a MIL and a failed inspection.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / CD

Possible causes

  • Filter B removed or replaced by an empty housing or pipe high
  • Unsuitable replacement filter fitted medium
  • Filter substrate cracked, melted or blown out medium
  • Leaking or blocked pressure lines misleading the detection low

Symptoms

  • Check engine light on
  • Failed emissions inspection
  • Louder exhaust or visible soot at the tailpipe

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2DCD

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication