P2DC5
Starter/Generator Phase Z Current Sensor Circuit
P2DC5 records a circuit fault of the phase Z current sensor in the starter/generator. A Z phase only exists on machines with more than one phase group. Mazda, for one, gives an integrated machine a second set of stator drivers labelled X, Y and Z, and CARB asks for circuit checks on such hybrid inputs. Since such sensors usually sit inside the machine electronics, a confirmed internal fault often means replacing the complete starter/generator, while a harness or plug problem can be fixed on its own. Rule out the external side first: supply, ground, connector and the low-voltage leads. No manufacturer documents P2DC5 publicly. Range check: P2DC6; high and low: P2D94, P2D97; intermittent: P2D9A.
Possible causes
- Phase Z sensor inside the starter/generator electronics failed high
- Low-voltage connector of the starter/generator damaged or not latched medium
- Supply or ground fault of the machine electronics low
Symptoms
- MIL and battery warning
- No recuperation and no electric boost
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2DC5
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.