P2DBD
Battery Charger B Coupler Lock Position Sensor Circuit Range/Performance
P2DBD is the plausibility fault of the coupler lock feedback on charger B: the signal is electrically valid yet does not fit what the lock is doing, for example a travel that is too short after a lock command, or longer than the pin could ever move with a plug inserted. No manufacturer documents P2DBD publicly. GM's patent US8936482B2 uses that second case to spot a broken or missing pin, since the computed travel then passes the locked end stop. Mercedes lists the A-side code P0D9F00, a malfunctioning position sensor of the charging cable lock, for the 22 kW charger of the smart electric drive (LI54.10-P-067823); loose low-voltage contacts at the charger were behind it. While the lock state is doubtful, charging is usually refused. Hard low or high faults are P2DBE and P2DBF.
Possible causes
- Lock pin broken off or missing, so the measured travel is implausible high
- Lock mechanism sticking or jammed by dirt or ice medium
- Loose low-voltage contacts at the charger or actuator medium
Symptoms
- Charging at inlet B refused
- Plug cannot be locked or released normally
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2DBD
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.