P2DBC
Battery Charger B Coupler Lock Position Sensor Circuit
P2DBC is the general circuit fault of the lock position sensor at charger B's coupler, the feedback telling the vehicle whether the pin that holds the charging plug in the inlet has moved out or back in. B marks a second inlet or charging path. No manufacturer documents P2DBC publicly. GM's patent US8936482B2 shows how such feedback can work: an angle sensor on the actuator motor shaft yields the pin travel, and fast charging is withheld if the lock cannot be confirmed. On the A side Ford stores P0D9E:00 in the SOBDM of 2021–2023 Mach-E, F-150 Lightning and e-Transit after the DC plug was pulled without pressing the release button, which damages the pin (TSB 23-2014); only the lock actuator is replaced. Specific fault types follow in P2DBD to P2DC0.
Possible causes
- Open or shorted wire between lock actuator and control module high
- Lock pin broken after the plug was pulled while still latched medium
- Corroded or loose connector at the lock actuator medium
- Faulty sensor input in the control module low
Symptoms
- DC fast charging not possible at inlet B
- Charger service warning in the instrument cluster
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2DBC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.