OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2DB6

Battery Charger B Cooling System Performance

P2DB6 is set when the cooling of a second on-board charger, charger B, cannot hold the unit inside its permitted temperature window, so the charger has to cut its power or stop. No manufacturer documents P2DB6 publicly. Mercedes shows the A-side case P0D8F on the AMG GLE 53 Hybrid (LI47.70-P-079963): AC charging ended after about 15 minutes because the low-temperature coolant lines of charger and power electronics had been connected the wrong way round, and the charger's two coolant temperature sensors also disagreed. CARB requires plug-in hybrids to flag charger faults that stop charging or slow it down. A charger B temperature beyond its limit is reported separately as P0E85. For the driver, plug-in charging becomes slow or aborts.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / B6

Possible causes

  • Low coolant level or trapped air in the charger cooling circuit high
  • Electric coolant pump of the low-temperature circuit weak or failed medium
  • Coolant hoses connected to the wrong circuit after assembly or repair low
  • Low-temperature radiator clogged or its airflow obstructed low

Symptoms

  • Charging power reduced at the charge station
  • Plug-in charging stops after some minutes
  • Charging fault message in the instrument cluster

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2DB6

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication