P2DB5
Drive Motor A Temperature Sensor C Circuit Intermittent
P2DB5 is set when the sensor C signal drops out or jumps briefly and then recovers – a flickering contact rather than a lasting open or short. No manufacturer documents P2DB5. The closest published case concerns sensor A: Bentley's P0A2E00 bulletin for 2020–23 Bentayga and Flying Spur hybrids traces temperature jumps to a sensor crimp whose resistance changes suddenly when hot, cured by a new sensor rather than a new motor. CARB expects circuit checks on input components to run without pause, which is why even short glitches end up in memory. The warning may disappear for days; testing the harness while the drive unit is warm helps to catch it.
Possible causes
- Crimp of sensor C changing resistance when hot high
- Loose or fretted terminals in the sensor C connector medium
- Lead rubbing through and touching intermittently low
Symptoms
- Warning light that disappears and returns
- Brief spikes or gaps in the sensor C value in live data
- Fault mainly after long or hard drives
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2DB5
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.