OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2DB4

Drive Motor A Temperature Sensor C Circuit High

P2DB4 is the open-circuit side of sensor C: the voltage climbs toward the reference because hardly any current still flows through the thermistor. A broken wire, a terminal backed out of the motor connector, corrosion or a cracked thermistor are the likely finds; a short to a supply voltage is rarer. With an NTC the value shown would be an impossibly cold winding. For the W-phase probe of the same Mitsubishi (sensor 3, own code P3055) the limit is likewise 4.93 V held half a second with at least 8 V at the power drive unit, and the repair path ends with a new power drive unit or front motor. The UAES patent places the upper limit just below supply voltage. No manufacturer documents P2DB4 itself. P2DB3 is the low side, P2DAF the same fault on sensor B.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / B4

Possible causes

  • Open signal or ground lead of sensor C high
  • Terminal backed out or corroded in the motor connector medium
  • Thermistor open inside the stator medium
  • Signal lead shorted to a supply voltage low

Symptoms

  • Hybrid system warning and check engine light
  • Sensor C reads far below ambient temperature in live data
  • Electric drive power limited

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2DB4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication