P2DB2
Drive Motor A Temperature Sensor C Circuit Range/Performance
P2DB2 flags a sensor C reading that is electrically valid but disagrees with what the motor should show. With three probes a cold-soak comparison is the natural test: Mitsubishi checks its W-phase sensor (sensor 3, own code P3057) on the 2023 Outlander PHEV once per driving cycle after more than 90 minutes off, inverter switched off, and rejects it when it lies over 26 °C away from the U-phase reading for 0.8 s or longer; the V-phase check runs continuously instead. CARB asks for two-sided rationality checks where feasible. A UAES patent also compares a stator probe with coolant and power-switch temperatures after a long stop. No manufacturer documents P2DB2. Thermistor drift, a poor contact or a probe that has lost touch with its winding are typical causes.
Possible causes
- Sensor C thermistor drifted from its resistance curve high
- Extra resistance at a corroded or worn terminal medium
- Probe loose on its phase winding low
Symptoms
- Hybrid system warning or check engine light
- Sensor C stands well apart from the other motor sensors after a cold start
- No noticeable driving change in many cases
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2DB2
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.