P2DB1
Drive Motor A Temperature Sensor C Circuit
P2DB1 reports a circuit fault on a third temperature sensor (C) in drive motor A. Three probes in one motor make most sense when each phase winding of the three-phase machine gets its own: Mitsubishi equips the front motor of the 2023 Outlander PHEV with U-, V- and W-phase coil sensors, and a fault on any of them lights both the hybrid warning and the MIL. The W-phase probe, its sensor 3, uses the maker's own codes P3055 to P3057 rather than P2DB1, and no manufacturer documents P2DB1 publicly. The direction of the fault is left to P2DB3 (signal low) and P2DB4 (signal high). With two other probes still working the car usually drives on, but the control unit may cap power.
Possible causes
- Broken or shorted sensor C lead between motor and inverter high
- Loose or corroded terminal at the motor connector medium
- Sensor C thermistor failed in its phase winding medium
- Faulty sensor input in the inverter or motor control unit low
Symptoms
- Hybrid system warning and check engine light
- Sensor C missing or frozen in live data while the other motor sensors read normally
- Electric drive power capped
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2DB1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.