OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2DB0

Drive Motor A Temperature Sensor B Circuit Intermittent

P2DB0 logs short dropouts or jumps in the sensor B signal that come and go too fast for the steady low and high checks. Because CARB requires circuit monitoring of input components to run continuously, such glitches are caught while driving. No manufacturer documents P2DB0, but Bentley's 2025 bulletin for the 2020–23 Bentayga and Flying Spur hybrids describes the same pattern on sensor A under P0A2E00: at high temperature the crimped joint of the motor temperature sensor shifts its resistance abruptly and the reading spikes. Only the sensor is renewed, yet engine and gearbox must come out to reach it. Heat cycling, vibration and loose terminals along the run from stator to inverter are the usual suspects. Expect a fault that is often heat-related and hard to reproduce on a cold car.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / B0

Possible causes

  • Resistance jumps in the sensor crimp at high temperature high
  • Worn or loose terminals in a connector of the sensor B line medium
  • Chafed lead with intermittent contact under vibration low

Symptoms

  • Warning light that comes and goes, often after hard driving
  • Sensor B value spikes briefly in live data
  • Electric drive power briefly limited on some models

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2DB0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication