OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2DAE

Drive Motor A Temperature Sensor B Circuit Low

P2DAE means the sensor B voltage has fallen below the lowest value a healthy sensor can deliver. Winding probes are mostly NTC thermistors whose resistance collapses as they heat – Thinking Electronic quotes roughly 0.46 kOhm at 180 °C for its stator probes – so with the usual pull-up circuit a near-zero voltage would read as an impossibly hot winding. In practice it points to a short: signal lead to ground or to the motor housing, a shorted thermistor, or a lead pinched during assembly. On the 2023 Outlander PHEV, Mitsubishi's own code P3053 catches its V-phase probe when the signal stays at or under 0.1 V for half a second, provided the power drive unit has at least 8 V. No manufacturer documents P2DAE publicly. P2DAF is the opposite fault; real overheating would be P0A2F.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / AE

Possible causes

  • Sensor B signal lead shorted to ground or motor housing high
  • Thermistor shorted internally (often replaceable only with the motor) medium
  • Lead pinched or chafed after work on the drive unit low

Symptoms

  • Hybrid system warning or check engine light
  • Sensor B shows an extremely high fixed temperature in live data
  • Electric drive power reduced

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2DAE

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication