P2DAD
Drive Motor A Temperature Sensor B Circuit Range/Performance
P2DAD covers a sensor B signal that stays inside the electrical window yet does not fit the situation. CARB asks for rationality checks on hybrid input components where feasible, logged under a code of their own apart from circuit and range faults. The obvious reference is a neighbouring probe: on the 2023 Outlander PHEV Mitsubishi compares its V-phase coil sensor (sensor 2, own code P3054) with the U-phase value after more than 90 minutes off and with the inverter switched off, and rejects it when the gap exceeds 26 °C for longer than 0.8 s. A UAES patent adds a running check: when winding current should heat the stator but the reading does not rise, the sensor is flagged as reading low. No manufacturer publishes P2DAD. Thermistor drift and extra contact resistance are the usual causes.
Possible causes
- Sensor B thermistor drifted from its resistance curve high
- Added resistance at a worn or corroded terminal medium
- Probe no longer seated firmly against the winding low
- Fault in the reference value, e.g. sensor A or coolant temperature low
Symptoms
- Hybrid system warning or check engine light
- Sensor B differs clearly from sensor A after the car has stood overnight
- Electric drive power limited in some situations
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2DAD
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.