P2DAC
Drive Motor A Temperature Sensor B Circuit
P2DAC is the general circuit fault of a second temperature sensor (B) in drive motor A; sensor A has its own series from P0A2A. A motor carries a second probe either as a backup element beside the first – Sensata's hairpin sensor patent allows two NTCs, or an NTC plus a PTC, in one housing – or as a probe on another phase winding. No manufacturer documents P2DAC publicly. Mitsubishi shows the multi-probe layout on the 2023 Outlander PHEV, with coil sensors on the U, V and W phases, but files sensors 2 and 3 under its own codes from P3052 and only accepts voltages between 0.1 and 4.93 V. Which side the voltage left is recorded by P2DAE (low) and P2DAF (high), not by P2DAC. Losing the reading usually means derated electric drive.
Possible causes
- Broken or shorted sensor B lead between motor and inverter high
- Loose, corroded or pushed-out terminal at the motor connector medium
- Sensor B thermistor failed inside the stator medium
- Faulty sensor input in the inverter or motor control unit low
Symptoms
- Hybrid system warning or check engine light
- Electric drive power limited
- Sensor B shows a fixed or missing value in live data while sensor A looks normal
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2DAC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.