P2DAA
DC/AC Converter Control Module A Switch B Circuit
P2DAA flags an electrical fault in the line of switch B belonging to DC/AC converter control module A, the vehicle's inverter for 120/230 V sockets. The module finds the switch B line open, shorted to ground or to supply, or without a usable signal. Having a second switch makes sense where outlets are split into groups – in Ford's patent US11043801B2 every socket, or a set of sockets, gets its own ON/OFF switch, driven by the DCACA through relays, and the controller sheds low-priority sockets when total load gets too high. No manufacturer documents P2DAA publicly, and which outlet group B serves is set by the maker. Only the sockets behind switch B should be dead; if group A fails at the same time, a common feed, ground or the module itself is the more likely culprit than two separate switches.
Possible causes
- Open or shorted wire or corroded connector in the switch B circuit high
- Switch B or its relay failed medium
- Shared feed, ground or converter module faulty (when group A also fails) low
Symptoms
- AC outlets of group B without power, other outlets work
- Message that onboard power is limited or unavailable
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2DAA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.