OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2DA8

DC/AC Converter Control Module A Switch A Circuit

DC/AC converter control module A is the inverter that turns direct current from the vehicle battery into household AC for sockets in the vehicle; Ford calls it DCACA and uses it for Pro Power Onboard on the F-150, where TSB 21-2127 handles a related fault, P0364 in the PCM. P2DA8 reports an electrical fault – open, short or no valid signal – in the circuit of switch A of this module. J2012 does not say what switch A is. In Ford's patent US11043801B2 the DCACA controller switches each socket group on and off through relays and can also read a manual button in the bed or cab; comparing voltages ahead of and behind the switch tells it whether the switch works. No manufacturer documents P2DA8 publicly. The affected outlets stay dead; driving is not affected.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / A8

Possible causes

  • Open or shorted wire or corroded connector between switch A and the module high
  • Switch A or its relay failed medium
  • Water ingress at an outlet panel in the bed or cargo area medium
  • Internal fault of the DC/AC converter module low

Symptoms

  • AC outlets of group A without power
  • Message that onboard power is unavailable
  • Outlet button without reaction

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2DA8

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication