OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D9B

Starter/Generator Phase U Current Circuit Intermittent/Erratic

P2D9B concerns phase U, the first phase of the starter/generator's main U-V-W group, when its current signal is unsteady rather than permanently out of range. GM's eAssist system, whose belt-driven machine appears in its tables as drive motor A, shows how a manufacturer separates hard limits from short events: the U sensor fails high or low beyond 440 A in either direction within 41.6 ms, while a fast, repeated overcurrent is handled by switching the inverter off for one 2.08 ms loop, counting the event and re-enabling, with the code following the third count. No manufacturer documents P2D9B itself publicly. Typical causes are a marginal plug contact, a damaged lead or a failing sensor. V and W intermittent: P2D9C, P2D9D; X to Z: P2D98 to P2D9A.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 9B

Possible causes

  • Marginal contact in the phase U sensor connector high
  • Phase U sensor lead with damaged insulation or a partly broken strand medium
  • Phase U current sensor beginning to fail low

Symptoms

  • Intermittent warning lamp, sometimes only after several trips
  • Sudden loss of electric assist, returning after a restart

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2D9B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication