P2D99
Starter/Generator Phase Y Current Circuit Intermittent/Erratic
P2D99 is stored when the phase Y current value of the starter/generator behaves in a way a real winding current cannot: sudden steps, dropouts to zero or noise between consecutive samples. The winding inductance smooths the true current, so such jumps implicate the measuring path. Only systems that actually sense phase Y can raise this code; GM's eAssist table, for example, lists current sensor checks for phases U and W alone. Mazda's ISG bulletin 01-004-25 confirms that a starter/generator may carry an X-Y-Z phase group. No manufacturer documents P2D99 publicly. Check the connector for corrosion and pin drag first, then the harness route near hot or moving parts. Steady counterparts: P2D93 (high), P2D96 (low), P2DC3 (circuit); X and Z intermittent: P2D98, P2D9A.
Possible causes
- Corrosion or weak pin tension in the phase Y sensor connector high
- Harness damaged by heat from the exhaust side or by contact with moving parts medium
- Phase Y current sensor producing a noisy or unstable signal low
Symptoms
- Sporadic hybrid or charging system warning
- Recuperation occasionally interrupted
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2D99
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.