P2D93
Starter/Generator Phase Y Current Sensor Circuit High
P2D93 reports that the current reading for phase Y of the starter/generator has climbed past its upper validity limit. Y is the middle letter of the X/Y/Z set this code series uses; the same list also has U/V/W variants (P2D9B to P2D9D), and no maker explains publicly how it assigns them. Not every design measures every phase. GM's eAssist belt system lists sensor circuit checks only for phases U and W, since with three phases one current can be calculated from the other two. A system that stores P2D93 therefore has a dedicated sensor on Y. No manufacturer documents this code publicly. Real phase currents do not get that high, so suspect a shorted signal lead, the sensor itself or the control module. P2D96 is the low fault, P2DC3 the general Y circuit code, P2DC4 the range check.
Possible causes
- Phase Y sensor signal lead chafed and touching a voltage-carrying wire high
- Internal fault of the phase Y current sensor in the machine electronics medium
- Defective input stage in the starter/generator control module low
Symptoms
- Hybrid or charging system warning on the instrument cluster
- Boost function during acceleration missing or reduced
- Engine restarts by the conventional starter or not at all after auto stop
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2D93
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.