OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D91

Engine Oil Pressure Sensor/Switch C Circuit Range/Performance

P2D91 says sensor C is electrically in range, but its reading does not fit the engine's state: pressure while the engine stands still, too little at speed, or a value that stays frozen while conditions change. Ford's 2024 summary handles sensor A this way under P0521, catching a signal stuck high, low or mid-range and readings that depart from a modelled pressure in either direction for 5 to 10 s. A GM 2024 engine table sets P0521 after 3 s, two-trip, when relative pressure exceeds 500 kPa under defined conditions or stays below 50 kPa above 1520 rpm. No manufacturer documents P2D91 publicly. A tired sensor, sludge in its bore, wrong oil grade, a worn pump or a sticking pressure control valve can be behind it; confirm real pressure with a mechanical gauge. Electrical faults are P2D8F/P2D90.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 91

Possible causes

  • Sensor C drifted or stuck at one value high
  • Real oil pressure deviation from worn pump, wrong oil or low oil level medium
  • Sticking oil pressure control valve of a variable pump medium
  • Sludge or debris in the sensor bore low

Symptoms

  • Malfunction indicator lamp after two drives on some makes
  • Oil pressure warning flickers or appears without reason
  • Possible engine noise if pressure is really low

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2D91

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication