OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D8E

Engine Oil Pressure Sensor/Switch C Circuit

Some engines have more than one oil pressure sensor or switch; which one is labelled A, B or C is up to the manufacturer. P2D8E is the general circuit code for sensor or switch C: the controller sees an electrical fault, or with a digital SENT sensor a message or internal error, that it cannot classify as too low or too high. No manufacturer documents P2D8E publicly; Audi's EA888 evo5 does use a sensor C, but only its low fault P2D8F appears in a bulletin. The matching checks for sensor A are published: Ford's 2024 engines report an internal or communication fault of a SENT pressure sensor as P0520 within 5 s, and GM tests a plain switch while the engine has been stopped for a long time, setting P0520 as a Type C code without lamp if it still shows pressure for 5 s. Low and high are P2D8F/P2D90.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 8E

Possible causes

  • Oil-soaked, corroded or loose connector at sensor C high
  • Internal electronics fault of the sensor or switch medium
  • Chafed or broken wire between sensor and engine control unit medium

Symptoms

  • Malfunction indicator lamp, depending on make
  • Oil pressure warning may come on without real pressure loss
  • Switchable oil pump may stay in its safe high-pressure stage

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P2D8E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication