OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D8B

Fan 2 Control Module Performance

With P2D8B the module that drives fan 2 fails a plausibility or self-test: it has supply and receives a request, yet the status or speed it reports does not fit. Audi's TSB 2081184/1 for the 2025 Q5 family lists P2D8B next to P2D88 and the local LIN bus error U366500, all stored in the thermal management control unit (address 00C5). In those cars earth point 642 of the electrically controlled fan at the front right had been fitted incorrectly; production changed on 28 May 2025, and in service the ground is checked and repaired, with photos for the warranty claim. On other vehicles a worn motor, foreign objects in the blades or water in the connector are more likely. Typical complaints are a lit engine warning lamp and an air conditioning that no longer cools. Fan 1 has P2D88.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 8B

Possible causes

  • Damaged or incorrectly fitted ground point of fan 2 high
  • Foreign objects or worn bearings slowing fan 2 medium
  • Internal electronics fault of the fan 2 module medium
  • Water ingress or corrosion at connector or LIN line low

Symptoms

  • Engine warning lamp on
  • Air conditioning without cooling
  • Fault stored intermittently or permanently

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2D8B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication