P2D8A
Fan 2 Control Module Over Temperature
P2D8A is the second-fan twin of P2D87: the electronics that power fan 2 signal that they have reached their temperature limit. On cars with two radiator fans the second one usually sits on the other side of the shroud; Porsche, for instance, calls its right-hand fan number 2. No manufacturer publicly documents P2D8A. Since supplier modules such as those from Brose are specified for stable output only up to about 120 °C, heat soak in the engine bay after a hard run, a jammed motor pulling high current or clogged fins that starve the fan of air are the first suspects. CARB requires output devices to be checked for proper response, and a module that throttles itself no longer delivers the requested airflow. Expect higher coolant temperature in traffic and weaker air conditioning.
Possible causes
- Stiff or partly blocked fan 2 motor overloading its electronics high
- Heat build-up around the module, e.g. clogged fins or damaged air guides medium
- Defective temperature sensing or power stage in the fan 2 module medium
Symptoms
- Second fan slows down or cuts out after long idling
- Coolant temperature climbs at standstill
- Air conditioning blows warmer
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2D8A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.