OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D87

Fan 1 Control Module Over Temperature

Current electric radiator fans carry their own electronics, which turn the PWM or LIN request of the engine controller into motor current. P2D87 means this control module of fan 1 reports that it has become too hot. The supplier Brose, for example, rates its brushless fan modules with built-in LIN or PWM electronics for stable output up to 120 °C, so overheating points to a stiff or blocked motor drawing too much current, poor airflow at the radiator or an ageing power stage. No vehicle maker publicly documents P2D87 in this sense; Deutz uses the same number in its MD1 engine list for an unrelated fan drive output fault. CARB requires such output devices to be checked for correct response. A hot module usually cuts fan speed, so coolant temperature and air conditioning suffer. Fan 2 has P2D8A.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 87

Possible causes

  • Worn bearings or debris make the fan motor stiff, so the module overheats from excess current high
  • Clogged radiator or condenser fins, missing air guides, heat build-up at standstill medium
  • Ageing power stage or thermal contact inside the fan control module medium

Symptoms

  • Fan runs slower or switches off temporarily
  • Rising coolant temperature in slow traffic
  • Weaker air conditioning at standstill

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2D87

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication