P2D82
Charging Start Switch Circuit Intermittent/Erratic
P2D82 describes a start switch signal that toggles on its own or vanishes for moments. Because a start command is a trigger rather than a stop order, the visible effect is different from P2D7D: a flickering contact may start a charging session nobody asked for, for example ahead of a cheaper overnight tariff set in the timer, or swallow a deliberate press. No manufacturer documents P2D82 publicly; the switch type is known from Honda's and Toyota's patents, where turning the start switch on begins charging. Loose terminals, cracked solder joints, switch bounce on worn contacts and moisture that comes and goes are the usual reasons. The stored level is often in range, so watching the live switch status while moving the harness and pressing the key is the practical test.
Possible causes
- Loose or fretting terminal at the start switch connector high
- Worn contacts bouncing inside the start switch medium
- Wire damage that makes contact only at times medium
Symptoms
- Charging starts at unexpected times despite a timer
- Start button needs several presses
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2D82
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.