P2D81
Charging Start Switch Circuit Performance
P2D81 is the plausibility code of the charging start switch: the wiring reads as healthy, yet the reported switch behaviour cannot be right. Examples of what a control unit can check are a start request lasting far longer than any real press, a request that appears while no charging connector is plugged in, or a press that never produces the expected change of state. No manufacturer documents P2D81 publicly. CARB asks for rationality checks on inputs where feasible and for them to be stored separately from circuit and range faults, which is why this code stands apart from P2D7F and P2D80. The start switch in Honda's patent only mattered with the connector in place, which shows why plug state is a natural cross-check. Charging by button becomes unreliable or is disabled.
Possible causes
- Start button sticking or not returning high
- Worn switch contacts giving an unclear signal medium
- Connector detection signal wrong, so a valid press seems implausible low
Symptoms
- Start button works only sometimes or not at all
- Charging message about a switch fault
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2D81
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.