P2D7E
Charging Start Switch Circuit
P2D7E is the umbrella circuit code for a charging start switch, the control with which a person begins a charging session by hand, for example to override a charging timer. It is set when the start switch line delivers no usable signal; the split into high, low, performance and intermittent follows in P2D7F to P2D82. No manufacturer documents P2D7E publicly. Patents show the part: Honda's early electric vehicle charger began charging only after its charge start switch was turned on, and Toyota's wireless charging system lets a passenger in the car or a person on the ground start charging with such a switch. CARB treats monitored hybrid parts as inputs that must be tested for circuit faults. Charging by button fails, while plug-in or timer charging may still work.
Possible causes
- Loose, corroded or unplugged connector at the start switch high
- Broken wire between start switch and charging control unit medium
- Start switch itself defective medium
Symptoms
- Pressing the start button does not begin charging
- Charging only begins at the programmed timer time
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2D7E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.