P2D7D
Charging Stop Switch Circuit Intermittent/Erratic
P2D7D flags a stop switch signal that jumps between states without a matching button press, or drops out briefly and returns. Since the charging control treats a stop signal as an order to end charging, as both the Toyota and the Honda patents describe, a flickering line can end a session without anyone touching the button. No manufacturer documents P2D7D publicly. Faults that come and go point to a loose terminal, a cracked solder joint in the switch, a chafed wire that touches metal only when the body flexes, or moisture that dries out again. Unlike P2D7A and P2D7B, the measured level is mostly in range, so stored freeze-frame data and a wiggle test are the main tools. Owners typically find that charging stopped overnight for no visible reason.
Possible causes
- Loose or fretting terminal at the stop switch connector high
- Cracked solder joint or worn contact inside the switch medium
- Wire chafing that shorts only intermittently medium
Symptoms
- Charging stops unexpectedly, e.g. overnight
- Battery not full in the morning despite being plugged in
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2D7D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.