P2D7C
Charging Stop Switch Circuit Performance
P2D7C covers a stop switch signal that is electrically valid but does not make sense. A typical rationality test asks whether the reported state fits the situation, for instance a stop request that never ends although no one can hold a button that long, or a switch that reports pressed before any charging session has begun. No manufacturer documents P2D7C publicly. CARB requires such rationality checks for inputs where feasible and wants them stored under a code separate from circuit faults, which is the role of this code next to P2D7A and P2D7B. Toyota's patent illustrates the stuck-button problem behind it. A sticking key, a mechanically jammed trim panel or a switch with internal leakage are the usual suspects; charging may be blocked or the button ignored.
Possible causes
- Stop button mechanically sticking in the pressed position high
- Internal leakage in the switch giving an in-between signal medium
- Trim panel or object pressing on the button low
Symptoms
- Charging blocked although the plug is seated correctly
- Stop button feels stiff or does not spring back
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2D7C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.