OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D77

Battery Charger Control Module B Performance

P2D77 says the control electronics of charger B, a second on-board charger or charger stage, do not work as intended; faults of its processor are filed separately under P2D78. No manufacturer documents P2D77 publicly. The A-side twin P0D67 shows what such a check covers: Ford's 2014 hybrid OBD summary flags it during an active charge for internal faults that prevent charging, such as overvoltage in the low- or high-voltage section, a failed PFC stage or a broken high-voltage current sensor. On the 2022 Outlander PHEV, Mitsubishi watches the charger's internal 3.3, 6 and 12 V rails for 1 s and then stops charging. That a charger B exists is shown by Toyota's 6.6 kW RAV4 Prime charger, whose B stage has its own codes. Plug-in charging fails; driving continues.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 77

Possible causes

  • Internal power or control stage of charger B failed (unit replacement) high
  • Internal low-voltage supply rail of charger B out of tolerance medium
  • Weak 12 V supply or poor ground at the charger low
  • Charger software fault, cured by an update where one exists low

Symptoms

  • AC charging does not start or stops after a short time
  • Charging fault message or warning in the instrument cluster
  • Charging possible only at reduced power, if the other charger path still works

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2D77

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication