OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D74

Battery Charging System Negative Contactor D Control Circuit Range/Performance

P2D74 says the coil circuit of minus charging contactor D answers commands in an unexpected way, although it is neither open nor shorted. No manufacturer documents P2D74 publicly, and no published GM table has a range test for charge contactor coils. One measure a GM patent proposes is timing: how quickly the coil current climbs to a set level after the driver switches on. A slow rise suggests extra resistance in the circuit or a changed coil. That patent runs its test at key-on or remotely by telematics. CARB asks for a functional check of monitored outputs where feasible. Typical are aged plugs, a degraded coil and a weak driver. P2D73 is the open, P2D75/P2D76 low and high, P2D6D the plus side.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 74

Possible causes

  • Aged connector adding resistance to the coil circuit high
  • Coil of minus contactor D with changed resistance or inductance medium
  • Output stage no longer delivering full current low

Symptoms

  • Charging via contactor D stops intermittently
  • Delayed contactor click when charging starts
  • Code reappears after clearing

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2D74

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication