P2D72
Battery Charging System Negative Contactor D Stuck Open
P2D72 appears when negative charging contactor D will not close, leaving its path without a return lead; even with plus contactor D pulled in, nothing can be charged. No manufacturer documents P2D72 publicly. Detection can work like GM's Volt test P0D09 for plus contactor A, which expects the charger-side voltage to rise once the contactors are commanded on and fails below 10 V. A missing minus pole and a missing plus pole look the same from that voltage, so the module must use the coil drive states to tell P2D72 from P2D6B. CARB does not require faults to be flagged that cannot be told apart from a failing station. Burnt contacts and a weak coil supply are typical. P2D71 is the welded case.
Possible causes
- Minus contactor D does not close mechanically high
- Weak coil supply or poor ground at contactor D medium
- Module software misattributing a station fault low
Symptoms
- Charging in the affected mode never begins
- Station aborts right after plugging in
- Driving unaffected
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2D72
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.