P2D6E
Battery Charging System Positive Contactor D Control Circuit Low
P2D6E is set when the voltage on the coil supply of plus contactor D reads too low, usually a wire touching ground. No manufacturer documents P2D6E publicly. In a layout where the module switches the supply side of the coil, which a GM patent names as one option besides switching the ground side, a ground short means the driver works into a short circuit: the coil gets no usable current, contactor D stays open and the stage may cut out to protect itself. GM's 2016 contactor drive tests (P0D0A/P0D11) note that their open-load logic cannot see a ground fault, so detecting this case takes a dedicated test. Look for rubbed-through insulation and water in plugs. P2D6F is the high case, P2D75 the minus side.
Possible causes
- Coil feed wire shorted to ground high
- Water or corrosion in the connector of contactor D medium
- Shorted coil in plus contactor D low
Symptoms
- Charging mode via contactor D refused
- Fault set as soon as the contactor is commanded
- Charging warning shown
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2D6E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.