OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D6A

Battery Charging System Positive Contactor D Stuck Closed

P2D6A reports that positive charging contactor D still conducts after being told to open, nearly always because its contacts have welded. No manufacturer documents P2D6A publicly. A Ford patent explains where welds come from and how they are found: of the two charge contactors, the one closing last completes the circuit and takes the arcing, so Ford alternates the closing order between sessions. After charging, that last one is opened first and, once the charger-side voltage has had time to decay, is judged welded if that voltage still roughly equals the battery voltage. A single weld ends charging until repair; with both poles welded the car will not drive either. P2D6B is the opposite fault, P2D71 the minus side, P2D5C the C twin.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 6A

Possible causes

  • Contacts of plus contactor D welded by arcing high
  • Coil kept energised by a faulty output stage low
  • Faulty charger-side voltage measurement simulating a weld low

Symptoms

  • Charging locked after the previous session
  • Vehicle may not become ready if the other pole is welded too
  • Fault appears at the end of a charging session

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2D6A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication