OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D66

Battery Charging System Negative Contactor C Control Circuit Range/Performance

P2D66 flags a coil circuit of minus charging contactor C that is connected but responds outside its expected band while showing neither a break nor a short. P2D66 is not described by any manufacturer, and GM's public tables list no range test for charge contactor coils. A GM patent shows why such a check needs care: the coil current of the same contactor differs markedly between -40, 25 and 85 °C, so the patent compares readings with a reference stored offline for each contactor. CARB requires output parts that a maker monitors on a hybrid to respond properly to commands. Corroded terminals and an aged coil fit this pattern. P2D65 is the open, P2D67/P2D68 low and high, P2D5F the plus side.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 66

Possible causes

  • Corroded or loose terminals raising circuit resistance high
  • Coil resistance drifted through ageing or overheating medium
  • Module software with an unsuitable reference or calibration low

Symptoms

  • Charging via contactor C drops out now and then
  • Fault occurs mainly in very cold or very hot conditions
  • Code returns after clearing

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2D66

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication