P2D64
Battery Charging System Negative Contactor C Stuck Open
P2D64 appears when minus charging contactor C does not close; the third charging path then lacks its return conductor and no current flows even with the plus contactor in. No manufacturer documents P2D64 publicly. The principle mirrors GM's Volt check of plus contactor A (P0D09): once charge and precharge contactors are commanded closed, charger-side voltage should rise, and under 10 V in 8 of 9 readings fails the test. Seen from outside, a missing minus connection looks just like a missing plus one, so telling P2D64 from P2D5D needs both coil drives to be checked. CARB requires charger faults that prevent charging to be detected on plug-in hybrids. Burnt contacts, a weak coil feed and software are typical. P2D63 is the welded variant.
Possible causes
- Minus contactor C does not pull in or contacts burnt high
- Weak coil supply from wiring or connector faults medium
- Software misreads the precharge result low
Symptoms
- Charging in the affected mode never starts
- Charging station aborts immediately
- Driving unaffected
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2D64
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.