P2D62
Battery Charging System Negative Contactor C Circuit
P2D62 is the collective electrical code covering minus contactor C, which connects the return conductor of the third charging path to the traction battery. Neither the code nor the meaning of C is documented by any manufacturer. Separate switches in both poles are common on charging paths because only then can the inlet be fully isolated, and diagnosing the pair needs one pole held closed while the other is tested: a Hyundai quick-charge patent checks the plus relay first and then the minus relay against the voltage at the charging inlet, so a minus-side fault is pinned down separately. Under CARB, a plug-in hybrid must flag charging faults that disable or limit charging. Welded and non-closing cases are P2D63/P2D64, driver faults P2D65–P2D68, the plus side P2D5B. The charging mode via C is typically disabled.
Possible causes
- Coil of minus contactor C open or shorted medium
- Wiring or plug fault on the minus contactor medium
- Module output stage or software low
Symptoms
- One charging mode unavailable
- Charging warning in the cluster
- Driving unaffected
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2D62
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.