OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D5D

Battery Charging System Positive Contactor C Stuck Open

P2D5D means positive charging contactor C stays open although it was commanded closed, so the plus pole of that charging path never connects and the session fails right at the start. No manufacturer documents P2D5D publicly; Mazda, which lists the non-closing case for contactor B (P2BC6), says nothing about a C contactor. GM's comparable check for the Volt's plus contactor A (P0D09) illustrates detection: while the charger precharges, its terminal voltage ought to climb; if 8 of 9 readings, spaced 12.5 ms apart, remain under 10 V, the contactor counts as stuck open (Type A). CARB requires plug-in hybrids to detect charger faults that prevent charging. Suspects are burnt contacts, a weak coil feed and a jammed armature. Welding is P2D5C, the minus side P2D64.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 5D

Possible causes

  • Contactor C does not pull in (burnt contacts, jammed armature) high
  • Insufficient coil supply due to wiring or connector resistance medium
  • Control software misjudges the precharge voltage low

Symptoms

  • Charging in the affected mode does not start
  • Charging station reports an aborted session
  • Driving not affected

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2D5D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication