OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D59

Generator B Over Temperature

P2D59 indicates that generator B has become too hot. Which machine B means is up to the manufacturer: a second alternator in a dual charging system or a second motor-generator in a hybrid. No manufacturer documents P2D59 publicly. For generator A, Mitsubishi describes the hybrid case under P0A3B on the 2023 Outlander PHEV: a W-phase coil temperature of 199 °C or more for one second sets the code. On the alternator side, Infineon's LIN regulator TLE8881-3 raises a high-temperature flag as soon as the chip passes a programmable compensation threshold, where it also starts lowering the voltage set point. Typical causes are blocked cooling air or oil flow, sustained overload, a failed fan or a misreading sensor. Output is cut back, so charging or hybrid power may be limited.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 59

Possible causes

  • Obstructed cooling air path or reduced oil/coolant flow to the generator high
  • Sustained high electrical load at low engine speed medium
  • Temperature sensor or regulator measuring wrongly low

Symptoms

  • Reduced charging output or charge warning
  • On hybrids, limited electric or series-mode power

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2D59

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication