OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D58

Generator B Mechanical Performance

P2D58 reports that generator B, the second alternator of a dual charging system, does not deliver as commanded for mechanical reasons, most often because its drive slips. Such machines often sit on their own belt and idler. GM's customer satisfaction program N192255140 for 2019 Silverado medium-duty trucks with secondary generator option KHB shows how sensitive that mounting is: a bolt that missed its clamp load could work loose, so dealers fitted a new bracket for the A/C compressor together with the idler and inspected the belt. No manufacturer documents P2D58 publicly. Infineon's LIN regulator TLE8881-3 recognises a broken belt or stalled alternator when the phase signal stops swinging above a cut-in speed. Check belt, tensioner, pulley and bearings first. Generator A: P065C.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 58

Possible causes

  • Worn, glazed or oil-soaked drive belt slipping high
  • Weak tensioner or loose idler pulley mounting medium
  • Stiff alternator bearing or faulty overrunning pulley medium

Symptoms

  • Charge warning lamp, low charging voltage
  • Belt squeal or noise from the second alternator

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P2D58

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication