P2D55
Hybrid/EV Battery Pack Coolant Temperature Sensor C Circuit High
P2D55 is the counterpart to P2D54: the signal of battery coolant temperature sensor C sits at or near the reference voltage. On an NTC circuit with pull-up that is what an open circuit produces, so the controller sees an impossibly cold coolant value. Typical findings are a connector not plugged back after battery work, a broken wire, a spread terminal, or a short to a supply line; an open sensor element is less common. No manufacturer documents P2D55 publicly. GM's sensor A equivalent P0C45 fails below -40 °C, at an ADC count above 3890 (2019) or 3823 (2011 Volt); either must persist for 1.75 of 2.5 s, Type B. CARB demands such out-of-range checks. Battery heating may not work properly in winter.
Possible causes
- Open circuit: connector unplugged, broken wire or spread terminal high
- Signal wire shorted to a supply voltage medium
- Open sensor element low
Symptoms
- Live data shows about -40 °C for sensor C
- Battery heating or cooling uses substitute values
- Warning light; reduced power in cold weather possible
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2D55
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.