OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D53

Hybrid/EV Battery Pack Coolant Temperature Sensor C Circuit Range/Performance

P2D53 means coolant temperature sensor C of the battery loop delivers an electrically valid value that does not fit its surroundings. Unlike P2D2B, which only sees that sensors A and B disagree, this code blames sensor C itself. No manufacturer documents P2D53 publicly. GM's 2019 table 19OBDG01 shows the analogous test for sensor A (P0C43): after the HV contactors and battery heater have stayed off for 14,400 s or longer, the inlet value is compared with average cell temperature and outside air and fails at 23 °C or 22 °C difference, 8 s within 10 s, Type B. Audi's 2020 Q5 TFSI e set P0C4300 without a defect because the thermal management limits were too tight; software campaign NVLW fixed it. CARB demands such rationality checks.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 53

Possible causes

  • Sensor C drifting or reacting slowly high
  • Plausibility limits in the controller software too tight (update) medium
  • Contact resistance in the connector or air pocket at the sensor medium

Symptoms

  • Warning light, often after the car has stood for hours
  • No obvious driveability change at first
  • Battery conditioning less effective

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2D53

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication