OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D52

Hybrid/EV Battery Pack Coolant Temperature Sensor C Circuit

P2D52 is the general circuit code for a third coolant temperature sensor, C, in the liquid loop of a hybrid or EV battery. Sensors A and B are commonly the pack inlet and outlet; where C sits is not published and depends on the design. The code says only that the signal is unusable, without saying whether it lies under or over its limits. No manufacturer documents P2D52 publicly. The closest published case is sensor A: Volvo stores the general code P0C4200 in the battery control module of the XC90 T8 from 2016, and technical journal TJ 33546 has the workshop confirm the latest software and then simply clear it. CARB requires battery thermal management inputs to be monitored. Without this value the controller may limit charging or power.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 52

Possible causes

  • Loose connector, damaged wire or corroded pin in the sensor C circuit high
  • Failed coolant temperature sensor C medium
  • Battery controller software flagging the circuit wrongly (update) low

Symptoms

  • Check engine or hybrid system light
  • Battery heating or cooling not working as expected
  • Charging or electric power may be limited

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2D52

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication