OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D50

Hybrid/EV Battery Pack L Over Temperature

P2D50 is the last code in the lettered over-temperature series: after P0A7E for section A, or the whole pack if it is undivided, and sections B to K (P2D46 to P2D4F), L is the twelfth section. The deterioration series runs further to N (P2CD3), but sections M and N have no matching heat code in the current lists. No manufacturer documents P2D50 publicly. The logic would follow the parent code, which GM's 2019 table 19OBDG02 runs on the hottest module against 65 °C as a Type A code. Its ageing partner is P2CD1. In service, cell voltages and temperatures of section L are compared with the rest of the pack, and cooling faults are ruled out before any module is changed. CARB requires monitored battery temperature sensors. Power is reduced.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 50

Possible causes

  • Insufficient cooling of section L high
  • Worn or imbalanced modules in section L (see P2CD1, P0BBD) medium
  • Temperature sensor of section L reading high low

Symptoms

  • Hybrid or EV warning lamp
  • Reduced electric power and regeneration
  • Slower charging

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2D50

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication