OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2D4F

Hybrid/EV Battery Pack K Over Temperature

P2D4F reports that section K, the eleventh supervised section of a high-voltage battery, has gone over its temperature limit; overheating and ageing of the same section are kept apart, the latter being P2CD0. No manufacturer documents P2D4F publicly. In a liquid-cooled pack, sections far from the coolant inlet see the warmest coolant, so a weak pump, a low level or air left in the loop after service tends to show up there first. GM's 2016 table 16OBDG01 still checks the whole pack against 73.5 °C with 50 failures in 67 samples at 100 ms, Type A, and suspends the test while voltage, current or temperature sensor faults are active. Under CARB, the cooling performance of the pack has to be checked in operation. The car protects the cells by cutting power.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberD / 4F

Possible causes

  • Low coolant level or air trapped in the battery loop, often after service high
  • Weak or intermittently failing battery coolant pump medium
  • Worn modules in section K (compare with P2CD0) low

Symptoms

  • Warning light, often under load or in summer
  • Reduced electric drive and charging power
  • Coolant pump or fan audible for a long time after driving

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P2D4F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication